PVC Electrical Flame Retardant Tape ( UL Approval )
特性:由优质PVC薄膜涂布高性能压敏胶制作而成,耐候性、阻燃性能优异,具有高弹性、高贴服性,绝缘性能好,粘性强、剥离强度高,符合UL510标准要求。
Property: produced with high quality PVC film and high special pressure-sensitive adhesive, high conformable in all weather condition and flame retardant, with high elasticity, strong adhesiveness, good insulation, high viscosity, high peel strength, meets UL510 standard.
用途:适用于0~80℃温度环境,600V及以下电线电缆接头绝缘,高低压电线电缆护套保护,在有防火要求的场所提供良好的阻燃性。
Application : for insulating connect and sheath protection of wire and cable under the voltage of 600V and on the environment temperature between 0℃~80℃ ,flame retardant.
操作使用注意事项:操作环境温度以0℃以上为宜,且以半重叠方式缠绕为最佳,缠最后一层时100%重叠,且不要过度拉伸,以防翘头。胶粘带和缠绕物保持清洁,不得有油污、水、尘等污染。
Operation Note: the appropriate operating environment temperature is above 0 ℃, when wrapping it,It should be half way overlapped. the last layer use 100% overlap. Do not stretch the last layer too much when wrapping in order to avoid flagging. Keep clean on adhesive tape and object, no oil, water, dust and other pollution.
技术参数:
Technology Data:
Item |
Unit |
Data |
Thickness |
mm |
0.18 |
Tensile Strength |
N/cm |
26 |
Elongation |
% |
180 |
Electrical Strength |
kV/mm |
40 |
180°Peel Strength |
N/cm |
1.9 |
Flame Retardant |
|
passed |
Weather Resistance |
|
passed |
Remark: The above data and information is based on our test results, the user must make sure the practicability of the products before using.
PVC Electrical Flame Retardant Tape ( UL Approval )
Property: produced with high quality PVC film and high special pressure-sensitive adhesive, high conformable in all weather condition and flame retardant, with high elasticity, strong adhesiveness, good insulation, high viscosity, high peel strength, meets UL510 standard.
Application : for insulating connect and sheath protection of wire and cable under the voltage of 600V and on the environment temperature between 0℃~80℃ ,flame retardant.
Operation Note: the appropriate operating environment temperature is above 0 ℃, when wrapping it,It should be half way overlapped. the last layer use 100% overlap. Do not stretch the last layer too much when wrapping in order to avoid flagging. Keep clean on adhesive tape and object, no oil, water, dust and other pollution.
Technology Data:
Item |
Unit |
Data |
Thickness |
mm |
0.18 |
Tensile Strength |
N/cm |
26 |
Elongation |
% |
180 |
Electrical Strength |
kV/mm |
40 |
180°Peel Strength |
N/cm |
1.9 |
Flame Retardant |
|
passed |
Weather Resistance |
|
passed |
Remark: The above data and information is based on our test results, the user must make sure the practicability of the products before using.